Cleaning your F2 scanner

Before cleaning the scan area, be sure to turn the scanner power off. Then flip the cover upwards to expose the scan area.

Clean the glass with a lint-free cloth and a mild, streak-free glass cleaner. Dry the glass completely using a separate clean, dry lint-free cloth like the one provided in the GlobalVision Cleaning Kit. Do not use abrasives or fluids that contain acetone or benzene. Do not spray liquids directly on the scanner glass plate or anywhere else in the scanner.

The white scanning area background plate is on the backside of the pressure plate. Wipe the white area with a lint-free cloth and a mild, streak-free, glass cleaner. Apply the cleaner to the cloth and first wipe the plate’s white area. Dry the plate completely using a separate clean, dry lint-free cloth. Do not use abrasives or fluids that contain acetone or benzene.

Maintaining your F2 scanner

The WIDEsystem software provides the information and calibration tools necessary to maintain the quality and life of the scanner. It contains the "Status" of the scanner, general "Info", and "Network" and "License" information.

To view the scanner and maintenance status: Double-click on the WIDEsystem icon icon in the system tray. Click on the "Status" tab in the WIDEsystem window that appears.

To view information about the scanner, such as firmware version and serial number: Click the "Info" tab.

To add or remove a network scanner, click on the "Network" tab. Of note, scanners can also be added via the "Scanner" drop-down list at the top of the window, too.

To upgrade your license (with a new license key), click on the "License" tab.

Click "OK" to save the changes and close the WIDEsystem window.

Cleaning and maintenance frequencies for your F2 scanner

This table outlines the recommended frequencies for the replacement and maintenance of key components:

*Replacement of key components is dependent on usage and should be verified by an authorized technician prior to replacement. The authorized technician may recommend replacement prior to the number of days specified if required. In addition, the authorized technician may recommend additional maintenance on the scanner as required. 

 ** Performed under GlobalVision service contract by an authorized technician. 

*** It is imperative that the scanner be connected to a dedicated power supply. If not, performance can be dramatically affected.

Did this answer your question?